Condensation control used to prevent overflowing of an evaporator drain pan
Quantity in Basket: None
Low cost condensation control used to prevent overflowing of an evaporator drain pan
Mode Of Operation:
With proper mounting of the sensors, the REL34024 Condensation Control System will detect the presence of water before overflow can occur.
If water is detected for the entire time period selected on the control (60-180 seconds), the 24 VAC output from the T’stat Output terminal is interrupted, the control is locked out, and the optional overflow LED is lit. If water is detected, but not for the entire time period selected, no interruption of the 24 VAC from the T’stat Output terminal occurs. This eliminates nuisance trips and unnecessay lockouts. Removal of the water automatically resets the REL34024 after a lockout condition.
Every control is shipped with: (2) sensors, (2) mounting clips, (2) self-stick adhesive clips, and detailed instructions with diagrams for installation and troubleshooting.
Voltage: 18 to 30 VAC
Frequency: 50 to 60 Hz
24 VAC to thermostat/cooling control
24 VAC to optional overflow LED
Output Rating:2 amps
Delay Before Trip:1-3 minutes.
Replaces Part Numbers:24-ICM340, CAR1CM340