Pneumatic, four-port, snap acting relay, Wall | Panel Mount
Quantity in Basket: None
Honeywell RP471A1002 Snap-Acting Pneumatic Relay
The four port, snap acting relay converts a proportional air pressure change from a controller to a positive (two-position) pressure change.
It can also divert a supply line to one of two branches.
Replacement device is available for Johnson, Powers, Robertshaw, Barber-Colman, and older Honeywell devices.
Manually adjustable switching pressure.
Sharp barb connections for 5/32 inch (4 mm) O.D. plastic tubing.
Molded plastic construction with neoprene diaphragms and stainless steel lever.
Mounts in any position with mounting clip.
Type Pneumatic, four-port, snap acting relay
Operation Proportional to 2-position converter
Capacity (Cv) 0.039 scfm at 1 psi differential (18 mL/s at 5 kPa differential)
Air connections Barb for 5/32 in. (4 mm) O.D. plastic tubing
Dimensions (in) 1 1/2 in. Diameter, 2 3/4 in. deep,
Dimensions (mm) 38 mm diameter, 70 mm deep
Differential Pressure Range (kPa) 7 kPa maximum Differential Pressure Range (psi) 1 psi maximum
Includes 14003030-001 1 1/2 in. Mounting Clip for Mounting relay to wall or panel
Maximum Operating Pressure (kPa) 205 kPa
Maximum Operating Pressure (psi) 30 psi
Mounting Type panel, Wall
Pressure Range (kPa) 0 to 125 kPa
Pressure Range (psi) 0 to 18 psi
Temperature range (C) -18 C to +60 C
Temperature range (F) 0 F to 140 F
Description Pneumatic, four-port, snap acting relay, SPDT Humidity Ratings (% RH) 5 to 95% RH