Repeater Relay, use with two-pipe Capacity-type thermostat and Type B controller
Quantity in Basket: None
Honeywell RP470B1001 Pneumatic Selector Relay:
Three-port relays used in HVAC systems to perform a variety of relay functions; transmit the higher of two input signals, lock out one pressure signal when a second signal is higher, or transmit the lower of two pressure signals. Replacement devices are available for Johnson, Powers, Robertshaw, Barber-Colman, and older Honeywell devices.
Uses diaphragm-logic technology.
In-line, wall, or panel mounted.
Sharp-barb air connections.
Type Pneumatic Three-port Selector Relay
Operation Lockout, Lower-of-two pressures, repeater relay
Capacity (Cv) 0.039 scfm at 1 psi differential (18 mL/s at 5 kPa differential)
Air connections Barb for 5/32 in. (4 mm) O.D. plastic tubing
Dimensions (in) 1 1/2 in. diameter, 1 in. deep
Dimensions (mm) 38 mm diameter, 25 mm deep
Includes 14003030-001 1 1/2 in. Mounting Clip for Mounting relay to wall or panel
Maximum Operating Pressure (kPa) 205 kPa
Maximum Operating Pressure (psi) 30 psi
Mounting Type In-line, panel, Wall
Pressure Range (kPa) 0 to 125 kPa
Pressure Range (psi) 0 to 18 psi
Temperature range (C) -18 C to +60 C
Temperature range (F) 0 F to 140 F
Description Repeater Relay, use with two-pipe Capacity-type thermostat and Type B controller Humidity Ratings (% RH) 5 to 95% RH