|
Solenoid, Normally Closed Gas Valve, 3/4 in. NPT pipe size, 2 psi rated (Honeywell)![]() Code: GSV8295A1024
Price: $244.88
Quantity in Basket:
None
Solenoid, Normally Closed Gas Valve, 3/4 in. NPT pipe size, 2 psi rated (Honeywell)
Overview: V4295A/V8295A are normally closed and V4295S/V8295S are normally open (vent) solenoid gas valve. Suitable for use on furnaces, ovens, atmospheric burners, commercial water heaters, roof-top make-up air units, power burners, and commercial/industrial boilers. Features • V8295A,S are used with 24 Vac controllers. • V4295A,S are used with 120 Vac controllers. • Positive close off of gas flow when de-energized. • High valve spring force allows up to 0.7 psi back pressure at valve seat. • No inlet pressure influence at valve seat. • Inlet pressure changes do not affect ability to close valve. • Low operating noise. • Low rush-in current. • Upstream and downstream taps allows tapping and testing pressure points. Product Specifications Description Solenoid, Normally Closed Gas Valve, 3/4 in. NPT pipe size, 2 psi rated Type of Gas Air, natural, manufactured, mixed, and LP Pipe Size (inch) 3/4 in. Pipe Size (mm) 19 mm Pipe Size (DN) DN20 Capacity (cfh) 645 cfh Capacity (m³/hr) 18.3 m3/hr Valve Opening Time less than 1 sec Valve Closing Time less than 1 sec Pressure Ratings (psi) 2 psi Pressure Ratings (kPa) 13.8 kPa Body Pattern Straight-through, non-offset Mounting Vertical to 90 degrees from vertical Materials (Body) Die-cast aluminum Current (max amps at rated Vac/Hz) 0.8 amps Voltage 24 Vac Frequency 50 Hz Frequency 60 Hz Electrical Connections screw terminal connections Operating Temperature Range (F) -40 F to +140 F Operating Temperature Range (C) -40 C to +60 C Inlet/Outlet Pressure Tapping 1/4 in. NPT Dimensions (in.) 5 1/4 in. high x 3 7/16 in. wide x 2 3/4 in. deep Dimensions (mm) 133 mm high x 87 mm wide x 70 mm deep Approvals, Underwriters Laboratories Inc Component Recognized; File No. YLOZ Approvals, Canadian Standards Association Certificate No. 158158-1154280, Guide No. C3371-03, 85 Approvals, Factory Mutual Approved: 3/8 in., 1/2 in., 3/4 in. only Approvals, Industrial Risk Insurers Acceptable Approvals, Control Safety Devices Acceptable Replaces Part Numbers: CARV8295A1024 |