Damper Actuator, Actuator force: Low, Spring Range: 5 to 10 psi
Quantity in Basket: None
Honeywell MP909D1227 Pneumatic Damper Actuator:
Used for pneumatic proportional control of variable volume terminal units and small dampers. Available in various operating ranges for either individual or sequence operation with other actuators. Replacement devices are available for Johnson, Powers, Robertshaw, and older Honeywell actuator models. Rugged ribbed aluminum body.
Low-friction shaft bearing.
Close tolerance on operating range and stroke.
Protected barb connector.
Versatile mounting and connecting hardware options.
Positive leakproof seal.
Replaces these Obsolete Part Numbers:MP909A1637.
Application Type Damper.
Actuator Force low.
Stroke (in) 2.4 in..
Stroke (mm) 61 mm.
Diaphragm Effective Area (sq in) 3 sq in.
Diaphragm Effective Area (sq cm) 19.4 sq cm .
Dimensions (in) 6 5/16 in. long ( add 1 in. for shaft ), 2 13/32 in. dia.
Dimensions (mm) 160 mm long ( add 25 mm for shaft ), 61 mm dia.
Maximum Operating Pressure (psi) 30 psi.
Maximum Operating Pressure (kPa) 207 kPa.
Temperature range (F) 50 F to 140 F.
Temperature range (C) 10 C to 60 C.
Type Spring return .
Air connections Barbed fitting for 5/32 in. or 1/4 in. O.D. tubing.
Includes Actuator only. 3/8"-16 Threaded Shaft. No Mounting Bracket or Ball Joint.
Description Damper Actuator, Actuator force: Low ,Spring Range: 5 psi to 10 psi.
Humidity Ratings (% RH) 5 to 95% RH.
Actuator Spring Range (psi) 5 psi to 10 psi.
Actuator Spring Range (kPa) 34 kPa to 69 kPa