Pneumatic Manual or Minimum Position Switch, Panel | Wall Mount

Pneumatic Manual or Minimum Position Switch, Panel | Wall Mount
Code: THE970A1005
Price: $63.88
Quantity in Basket: None
Quantity:
SP970A1005 Pneumatic Manual or Minimum Position Switch:

Used to manually position a remote damper actuator or to reset the setpoint of a pneumatic controller.
They can also provide minimum damper position by setting a minimum pressure limit in the branch line to the damper actuator. Replacement kits are available for Johnson, Powers, Robertshaw, Barber-Colman, and older Honeywell switches.
Two spans available.
Pilot bleed and isolated pilot models available.
Wall or panel mounting.

Product Specifications:

Type Three-port pneumatic manual or minimum position switch with pilot bleed
Operation Used to manually position a remote damper actuator or reset setpoint of pneumatic controller
Airflow Usage 0.022 scfm (9.8 mL/s) Capacity (Cv) 0.021 scfm (9.4 mL/s) below minimum position. Above minimum position, device feeding pilot determines capacity
Air connections Barb fittings 5/32 in. (4 mm) O.D. plastic tubing
Dimensions (in) 1 1/2 in. diameter, 3 in. deep
Dimensions (mm) 38 mm diameter, 76 mm deep
Includes Knob, 0 to 100 % scale plate and locknuts
Input Span (kPa) 34 kPa
Input Span (psi) 5 psi
Maximum Operating Pressure (kPa) 170 kPa
Maximum Operating Pressure (psi) 25 psi
Mounting Type panel, Wall
Output Pressure Range (kPa) 21 to 103 kPa
Output Pressure Range (psi) 3 to 15 psi
Pressure Range (kPa) 0 to 125 kPa
Pressure Range (psi) 0 to 18 psi
Temperature range (C) -18 to +60 C
Temperature range (F) 0 to 140 F
Description Manual Pressure Regulator or Provides minimum branch line pressure when used with a high capacity device (like a RP920). Humidity Ratings (% RH) 5 to 95% RH