10 PSI, Pneumatic / Electric Switch, Panel Mount

10 PSI, Pneumatic / Electric Switch, Panel Mount
Code: REL58B1012
Price: $67.76
Quantity in Basket: None
Honeywell P658B1012 Pneumatic/Electric Switch:

Pneumatic-electric switches (P658A,B,E and F) used to convert a pneumatic signal from a controller to an electrical switching action (spdt) to provide start and stop control of equipment such as fans and pumps.
Replacement devices available for Johnson, Powers,Robertshaw, Barber-Colman, and older Honeywell pneumatic/ electric switches.

Product Specifications:

Type Pneumatic/Electric Switch
Action Make R-B on pressure fall to setpoint, Make R-W on pressure rise to setpoint plus differential
Operation Converts pneumatic signal to electrical switching action (spdt)
Air connections Barb fitting for 1/4 in. (6 mm) O.D. plastic tubing
Dimensions (in) 3 7/16 in. high, 3 1/4 in. wide, 1 3/4 in. deep
Dimensions (mm) 87 mm high, 83 mm wide, 44 mm deep
Electrical Connections Screw terminals
Voltage 125 Vac, 250 Vac, 480 Vac
Frequency (Hz) 50 Hz, 60 Hz
Current 25 A resistive, 750 VA pilot duty
Differential Pressure Range (kPa) 14 kPa
Differential Pressure Range (psi) 2 psi
Maximum Operating Pressure (kPa) 207 kPa
Maximum Operating Pressure (psi) 30 psi
Mounting Type panel
Switching Pressures (kPa) 69 kPa
Switching Pressures (psi) 10 psi
Temperature range (C) 4 to +71 C
Temperature range (F) 40 to +160 F
Description Pneumatic / Electric Switch, Panel Mount. Factory Calibrated at 10 psi.
Approvals, Underwriters Laboratories Inc. File No. E49725, Category SDFY2
Approvals, Canadian Underwriters Laboratories Listed, Volume I
Humidity Ratings (% RH) 5 to 95% RH, 80 F (27C) max wet bulb