Pneumatic / Electric Switch, Surface Mount

Pneumatic / Electric Switch, Surface Mount
Code: REL58A1013
Price: $89.90
Quantity in Basket: None
Quantity:
Honeywell P658A1013, P658A1005 Pneumatic/Electric Switch:

Pneumatic-electric switches (P658A,B,E and F) used to convert a pneumatic signal from a controller to an electrical switching action (spdt) to provide start and stop control of equipment such as fans and pumps.
Replacement devices available for Johnson, Powers,Robertshaw, Barber-Colman, and older Honeywell pneumatic/ electric switches.

Product Specifications:

Type Pneumatic/Electric Switch
Action Make R-B on pressure fall to setpoint, Make R-W on pressure rise to setpoint plus differential
Operation Converts pneumatic signal to electrical switching action (spdt)
Air connections Barb fitting for 1/4 in. (6 mm) O.D. plastic tubing
Dimensions (in) 5 3/8 in. high, 3 3/8 in. wide, 2 in. deep
Dimensions (mm) 137 mm high, 86 mm wide, 51 mm deep
Electrical Connections Screw terminals
Voltage 125 Vac, 250 Vac, 480 Vac
Frequency (Hz) 50 Hz, 60 Hz
Current 25 A resistive, 750 VA pilot duty
Differential Pressure Range (kPa) 14 kPa
Differential Pressure Range (psi) 2 psi
Includes Case
Maximum Operating Pressure (kPa) 207 kPa
Maximum Operating Pressure (psi) 30 psi
Mounting Type Surface
Switching Pressures (kPa) 69 kPa
Switching Pressures (psi) 10 psi
Temperature range (C) 4 to +66 C
Temperature range (F) 40 to +140 F
Description Pneumatic / Electric Switch, Surface Mount. Factory Calibrated at 10 psi.
Approvals, Underwriters Laboratories Inc. Category SDYF
Approvals, Canadian Underwriters Laboratories Listed, Volume II
Humidity Ratings (% RH) 5 to 95% RH, 80 F (27C) max wet bul