5/8" Universal Suction Line Accumulator for Air Conditioning and Heat Pump Systems (Diameter 4” Heig
Quantity in Basket: None
5/8" Universal Suction Line Accumulator for Air Conditioning and Heat Pump Systems (Height 15” Diameter 3”)
Specially designed for Air Conditioning Heat Pump Systems.
Accumulators are used on systems that use an orifice tube to meter refrigerants into the evaporator. The accumulator is connected directly to the evaporator outlet and stores excess liquid refrigerant. The primary function of the accumulator is to isolate the compressor from any damaging liquid refrigerant. Like receiver driers, accumulators remove debris and moisture from the air conditioning system. Moisture is the prime enemy to your air conditioning system. When moisture mixes with refrigerant it forms a corrosive acid, which will destroy your compressor.
Solid Copper Connections
“U” tube design for maximum flow of refrigerant and minimum oil entrapment.
Powder Coated Paint exterior surpasses 500 hour ASTM salt spray tests.
Integral 430-degree fusible plugs
Capacity rating listed below is holding capacity, in ounces, of R22 at 40 F divided by 7.0 to obtain recommended maximum system charge on fixed orifice systems.
Connection Size: 5/8“
Diameter: 4 “
Height: 9-5/8 “
Replaces Part Numbers: PA-4065-9-5C, CARB81391.
Used in Equipment Models: