Honeywell Flame Rectifier Pilot with a 0.052 in. dia. Orifice

Honeywell Flame Rectifier Pilot with a 0.052 in. dia. Orifice
Code: PIL7005A1037
Price: $446.76
Quantity in Basket: None
Quantity:
Honeywell Flame Rectifier Pilot with a 0.052 in. dia. Orifice.

Overview

Gas Pilot Burner Assemblies include a flame rod to prove the pilot flame. The assemblies are used with a suitable flame safeguard control on industrial or commercial gas burners or oil burners with gas pilots.

Features

Used with Honeywell controls using the flame rectification principle.
C7005A is for continuous pilot applications.
It includes an insulated flame rod, properly positioned relative to the flame retention type nozzle.
C7005B is similar to C7005A, but includes an ignition electrode suitable for automatic, electric-spark ignition, gas pilot applications.
Individually mounted flame rod and ignition electrode in ceramic insulators allow the head assembly to fit inside a 3-inch pipe.
Stainless steel fins on the flame retention type pilot head provide the correct ratio of flame rod area to ground area for maximum flame signal, and are beneficial in stabilizing the pilot flame.
Pilot flame retention nozzle and mixing tube are threaded internally, 1/2-14 NPT and 3/8-18 NPT, respectively, and can be assembled with standard pipe fittings.
Pilot can be installed in vertical, horizontal, or inclined position.
Rajah connectors facilitate electrical connections.

Product Specifications

Application For Continuous (Standing) pilot.
Type of Gas Natural.
Orifice 0.052 in. dia.
Gas Fitting 1/2 in. NPT male thread.
Dimensions (in.) 3 in. diameter x 3 1/2 in. deep.
Dimensions (mm) 76 mm diameter x 343 mm deep x
Approvals, Underwriters Laboratories Inc Listed: File No. MP268, Guide No. MCCZ
Approvals, Canadian Standards Association Certified: File No. LR1620, Guide No. 140-A-2.
Approvals, Factory Mutual Approved: Report No. 24181.04
CARC7005A1037