ICP Reversing Valve with Coil and Wiring Harness
Quantity in Basket: None
UNIVERSAL PHOTO USED
ICP Reversing Valve with Coil
Reversing Valve Solenoid Operated R22, R502 Refrigerant
Designed for unitary split systems and heat pump package units.
Brass body construction with copper tubes
Operates on pressure differential high and low sides of refrigerant systems.
,br> The way the reversing valve works is the solenoid valve opens pressure ports to operate a nylon slider in the cylinder. This sleeve can jam or bind half way (called "wind milling") and will over heat the compressor in a few minutes.
Once this happens there is little chance that the valve will work again. If the valve is over heated when being installed it will be worthless.
If the system is very contaminated after a Burn Out it may stop the valve form working but there is the possibility of getting it to work again after several cycles.
It is possible for the valve to stick in the cooling mode but it is more likely to stick in the heat mode.
Replaces Part Numbers:
Used in Air Conditioning and Heating Brands: Arcoair, Comfortmaker, Heil, Kenmore, Tempstar, Synder General, Intercity Products
Used in ICP Equipment Models:
PH5536AKA6 CHP036AKC3 CHP036GKC3 CHP030AKC3 CHP030GKC3 CHP2236AKC3 CHP236GKC2 CHP236GKC3 CXH224AKC1 CXH230AKC1 CXH236AKC1 CXH242AKC1 H036AKC2 HO36AKC2 H030AKC2 HO30AKC2 H236AKC2 HHP036AKC2 HHP036AKC3