2 to 17 PSI Pneumatic / Electric Switch, Panel Mount

2 to 17 PSI Pneumatic / Electric Switch, Panel Mount
Code: REL658E1001
Price: $44.74
Quantity in Basket: None
Honeywell P658E1001 Pneumatic/Electric Switch:

Pneumatic-electric switches (P658A,B,E and F) used to convert a pneumatic signal from a controller to an electrical switching action (spdt) to provide start and stop control of equipment such as fans and pumps.
Replacement devices available for Johnson, Powers,Robertshaw, Barber-Colman, and older Honeywell pneumatic/ electric switches.

Product Specifications:

Type Pneumatic/Electric Switch
Action Make COM-NC on pressure fall to setpoint, Make COM-NO on pressure rise to setpoint plus differential
Operation Converts pneumatic signal to electrical switching action (spdt)
Air connections Barb fitting for 1/4 in. (6 mm) O.D. plastic tubing
Dimensions (in) 3 1/4 in. high, 2 7/8 in. wide, 1 3/4 in. deep
Dimensions (mm) 83 mm high, 73 mm wide, 44 mm deep
Electrical Connections 1/4 in. quick-connect male terminals
Voltage 125 Vac, 250 Vac, 480 Vac
Frequency (Hz) 50 Hz, 60 Hz
Current 125/250/277 Vac: 25 A resistive, 480 Vac: 10A resistive, All: 750 VA pilot duty
Differential Pressure Range (kPa) 7 kPa
Differential Pressure Range (psi) 1 psi
Maximum Operating Pressure (kPa) 207 kPa
Maximum Operating Pressure (psi) 30 psi
Mounting Type panel
Switching Pressures (kPa) 14 to 117 kPa
Switching Pressures (psi) 2 to 17 psi
Temperature range (C) 4 to 60 C
Temperature range (F) 40 to 140 F
Description Pneumatic / Electric Switch, Panel Mount. No Factory Calibration.
Approvals, Underwriters Laboratories Inc. File No. E49725, Category SDFY2
Approvals, Canadian Underwriters Laboratories Listed, Volume I
Humidity Ratings (% RH) 5 to 95% RH, 80 F (27C) max wet bulb